Godiag CAS2 CAS3 Adapter Not Working with Autel IM508?

Problem:
The godiag CAS 2/3 adapter will not work with my Autel IM508. However, my godiag CAS4 works and my godiag FEM/BDC works completely fine. Is there a good alternative adapter I can use with my Autel for CAS 2/3?

Here is the clue.

The godiag BMW CAS2/CAS3 adapter cannot be used with Autel, Lonsdor or OBDSTAR devices to read immo data.

Data cannot be read and written through the OBD2 bench method. This is because these devices cannot perform 100kb CANbus independent communication with the BMW IMMO module.

Godiag cas2/3 doesn’t work with autel im508/im608! Only you can test the key after you complete the job on bench!

Xhorse vvdi2, key tool max pro and key tool plus work fine with the godiag cas2/3 adapter on bench.

Comments

Godiag GD101 J2534 vs Openport 2.0

Openport 2.0 and godiag GD101 J2534 which is a better J2534 passthru device? Let’s take a look at the comparison table first. Item Openport 2.0 Godiag J2534 / VNCI NANO J2534 Protocols CAN 2.0 CAN/ISO15765 and K-line KWP2000/dual K-line ISO15765, ISO9141, ISO14230, J1850 PWM, J1850 VPW ELM327 mode – ELMConfig, ScanMaster, AlfaOBD, FiatECUScan ECUFlash Yes for Mitsubishi and Subaru – Honda HDS Yes Yes Toyota Techstream Yes Yes JLR SDD Yes Yes Forscan Yes Yes Renault Clip Yes Yes Benz Xentry Passthru Yes Yes BMW ISTA+ Yes Yes Nissan Consult 3+ Yes Yes VAG ODIS Yes Yes GM GDS2 Yes Yes J1979 Tester – Yes Subaru SSM4 Yes Not tested PCMFlash Yes Yes Operating system Windows XP/Win 7/Win10, better 32bit Windows 8/10/11, 32/64bit (driver not recognized if use Win7/WinXP) Firmware Update – Yes, How to update Godiag J2534 firmware? Connection USB USB In sum: Both cables are cheap and better keep both. Godiag J2534 /VNCI J2534 also works in ELM mode. It is compatible with...

How to Modify GODIAG GD101 / VNCI J2534 Nano ?

Here is the DIY modification tutorial for Godiag GD101 or VNCI J2534 HS-CAN + MS-CAN. Simply modification for GODIAG GD101 / VNCI J2534 Nano . Just add a slide switch and remove the two resistors. For me, a simple solution without an adapter. Maybe it will be helpful for someone. Remove R59 and R60 resistors. Add switch 2 position ON 6 pin. Tested with AlfaOBD App

How to Set up Honda HDS 3.105 with Godiag J2534?

Has anyone successfully set up Honda HDS 3.105.034 with a Godiag GD101 J2534 cable on Win10? Sharing our customers’ installation experience. How to Set up Honda HDS 3.105.034 for Godiag GD101? 1. Download and install the driver for the gd101 cable. 2. After installing the driver, be sure to check for updates to the built-in Firmware! The cable had firmware version 1.8 after purchase and the utility updated it to the latest version 1.14. Those who say that this cable is buggy probably did not update its built-in firmware, but used the one that came from the store. 3. Install the HDS. If the car model is before 2017, then use the old HDS. if it is newer, then use i-HDS. These are different HDS versions. Version/year/month/day of release HDS 3.017.012 — 10/15/28 — for Windows 8 and below HDS 3.101.019 — 07/16/22 — for Windows 8 and below HDS 3.102.008 — 02/17/22 — for Windows 10 and above HDS 3.102.029 — 07/17/17 — for Windows 10 and above HDS 3.102.051 — 03/18/1...

Search This Blog