How to Set up Godiag V600 BMW for ISTA 4.35.2 up?

To set up Godiag V600 BMW ICOM diagnostic tool with 03/2022 ISTA+ 4.35.20 or later version, you have to configure firmware.

If V600 shows Firmware status in State, don’t continue.

Follow steps below to set up Godiag v600 with ISTA+ 4.32.5 and up:

1. Connect V600 with vehicle, connect device with either WLAN or WiFi (Don’t connect WLAN and WiFi at the same time), run AnyVCI.Updater.exe application

Download application here

https://mega.nz/file/TFhBWJwT#E2X5Jp4N5XSBCJIhKGOYihpTfkbGPIzz95ZGhPfQxnU

Registration is required for the first use. Then login with user name and password.

2. Run STDiag Updater 2021

Go to “Advanced features” setting

3. Go to FirmwareVersion

Select user-defined

Set value as following

Boot:13000

App:14700

Pck: 32211

Press Set to save setting

Then check device information in iTool Radar

Godiag BMW V600 scanner now is working fine with ISTA+ 4.35.20.

Comments

How to Modify GODIAG GD101 / VNCI J2534 Nano ?

Here is the DIY modification tutorial for Godiag GD101 or VNCI J2534 HS-CAN + MS-CAN. Simply modification for GODIAG GD101 / VNCI J2534 Nano . Just add a slide switch and remove the two resistors. For me, a simple solution without an adapter. Maybe it will be helpful for someone. Remove R59 and R60 resistors. Add switch 2 position ON 6 pin. Tested with AlfaOBD App

Free Download Godiag J2534 Driver 2.3- Update Renault CLIP

Godiag GD101 J2534 passthru device released new software V2.3. With the newest 2.3 driver, the Godiag GD101 / VNCI J2534 devices now work in Renault Clip! Godiag driver 2.3 download Software V2.3 Firmware V1.9 Fix bug: failed to test Renault clip software NOTE: Tested working with Renault Clip V227. Free to test other versions. J2534 device only works with 2005- CAN BUS Renault models. For -2005 Kline models, better use CAN CLIP interface. How to use Godiag J2534 with Renault CLIP http://blog.obdii365.com/2023/08/03/how-to-set-up-renault-clip-for-godiag-j2534-interface/

Godiag GD101 J2534 vs Openport 2.0

Openport 2.0 and godiag GD101 J2534 which is a better J2534 passthru device? Let’s take a look at the comparison table first. Item Openport 2.0 Godiag J2534 / VNCI NANO J2534 Protocols CAN 2.0 CAN/ISO15765 and K-line KWP2000/dual K-line ISO15765, ISO9141, ISO14230, J1850 PWM, J1850 VPW ELM327 mode – ELMConfig, ScanMaster, AlfaOBD, FiatECUScan ECUFlash Yes for Mitsubishi and Subaru – Honda HDS Yes Yes Toyota Techstream Yes Yes JLR SDD Yes Yes Forscan Yes Yes Renault Clip Yes Yes Benz Xentry Passthru Yes Yes BMW ISTA+ Yes Yes Nissan Consult 3+ Yes Yes VAG ODIS Yes Yes GM GDS2 Yes Yes J1979 Tester – Yes Subaru SSM4 Yes Not tested PCMFlash Yes Yes Operating system Windows XP/Win 7/Win10, better 32bit Windows 8/10/11, 32/64bit (driver not recognized if use Win7/WinXP) Firmware Update – Yes, How to update Godiag J2534 firmware? Connection USB USB In sum: Both cables are cheap and better keep both. Godiag J2534 /VNCI J2534 also works in ELM mode. It is compatible with...

Search This Blog