Skip to main content

Autel Program BMW CAS4 key with Godiag GT100

The purpose to use Godiag GT100 breakout box with Autel is that its indicators will flash if Autel has a good communication with the CAS4 ECU box.

 

Look at the following image:

-The left one is Godiag GT100 breakout box;

-The testing platform is the middle parts (red pcb with a switch, 2 black adapters, 1 key coil). It will be a new testing platform with a shell made by obdii365.com engineer.

 

- The right one is CAS4 ECU box.

 

- Another one is Autel key programmer i.e IM608 /IM508 ( in the image it is a code reader because the IM608 is temporarily loaned out by my friend)

autel-gt100-bmw-cas4-key-1


Press the switch of testing platform, it will flash, when you put a working key into the coil, it will keep flashing.

autel-gt100-bmw-cas4-key-2

The indicators on Godiag GT100 breakout box will flash to indicator the CAS4 ECU is communicating fine with Autel.

autel-gt100-bmw-cas4-key-3

Okay, next is to operate on Autel key programmer by following the on-screen instructions.

 

Enjoy!

 

www.obdii365.com

 

Labels:

Comments

Post a Comment

Popular posts from this blog

How to Modify GODIAG GD101 / VNCI J2534 Nano ?

Here is the DIY modification tutorial for Godiag GD101 or VNCI J2534 HS-CAN + MS-CAN. Simply modification for GODIAG GD101 / VNCI J2534 Nano . Just add a slide switch and remove the two resistors. For me, a simple solution without an adapter. Maybe it will be helpful for someone. Remove R59 and R60 resistors. Add switch 2 position ON 6 pin. Tested with AlfaOBD App
Post a Comment
Read more

Free Download Godiag J2534 Driver 2.3- Update Renault CLIP

 Godiag GD101 J2534 passthru device released new software V2.3.  With the  newest 2.3 driver, the   Godiag GD101  /  VNCI J2534   devices now work in Renault Clip! Godiag driver 2.3 download Software V2.3 Firmware V1.9 Fix bug: failed to test Renault clip software NOTE:  Tested working with Renault Clip V227. Free to test other versions.  J2534 device only works with 2005- CAN BUS Renault models. For -2005 Kline models, better use CAN CLIP interface.  How to use Godiag J2534 with Renault CLIP http://blog.obdii365.com/2023/08/03/how-to-set-up-renault-clip-for-godiag-j2534-interface/
Post a Comment
Read more

Free Download Renault CAN CLIP V227 for Godiag J2534

  Here comes the free Renault CAN CLIP V227 software crack for J2534 passthru devices.     Software Version: V227 Operating system: win7, win8, win10 32bit. Compatible devices:  Godiag J2534 ,  Openport 2.0 ,  PCMTuner , Scanmatik Pro etc Multi-language Free Download Renault CAN CLIP V227 File including: CLIP crack and activation keygen Renault CLIP Update Log: New Vehicle: No new vehicle integrated on this version   How to Activate Renault Clip V227? 1. Open the Activation folder and run Crack Renault CLIP.reg 2. Open the clip 227 file and run setup.exe 3. Open the desktop CLIP shortcut icon to get the ID to activate the software (the keygen is in the Activation folder) 4. Run godiag _canclip.reg (if you use  godiag gd101 j2534  device, you need to install it, others do not need it)  or openport.reg etc How to Set up Renault Clip for Godiag J2534 Interface?   How to Set up Openport 2.0 with Renault Clip V227?
Post a Comment
Read more