How to Activate Godiag J2534 Toyota Techstream?

After installing Toyota Techstream V17 software for Godiag GT101 J2534 cable, it asks for an activation key. Where can I get the registration key?

Activate Godiag J2534 Toyota Techstream 1

Follow the steps below to activate Toyota Techstream for Godiag J2534:

Download and run J1979 Diagnostic Tool setup for godiag cable

Go to PIN Tool

Choose software version and region.

*V17 and older versions can be activated via this program. V18 you can run software from patch to bypass activation key. Godiag Techstream V18 software does contain patch.

Paste software ID here to calculate the password.

Copy and paste password to Techstream.

Press OK to activate software.

Software is ready to use.

www.obdii365.com

Comments

How to Modify GODIAG GD101 / VNCI J2534 Nano ?

Here is the DIY modification tutorial for Godiag GD101 or VNCI J2534 HS-CAN + MS-CAN. Simply modification for GODIAG GD101 / VNCI J2534 Nano . Just add a slide switch and remove the two resistors. For me, a simple solution without an adapter. Maybe it will be helpful for someone. Remove R59 and R60 resistors. Add switch 2 position ON 6 pin. Tested with AlfaOBD App

Free Download Godiag J2534 Driver 2.3- Update Renault CLIP

Godiag GD101 J2534 passthru device released new software V2.3. With the newest 2.3 driver, the Godiag GD101 / VNCI J2534 devices now work in Renault Clip! Godiag driver 2.3 download Software V2.3 Firmware V1.9 Fix bug: failed to test Renault clip software NOTE: Tested working with Renault Clip V227. Free to test other versions. J2534 device only works with 2005- CAN BUS Renault models. For -2005 Kline models, better use CAN CLIP interface. How to use Godiag J2534 with Renault CLIP http://blog.obdii365.com/2023/08/03/how-to-set-up-renault-clip-for-godiag-j2534-interface/

Godiag GD101 J2534 vs Openport 2.0

Openport 2.0 and godiag GD101 J2534 which is a better J2534 passthru device? Let’s take a look at the comparison table first. Item Openport 2.0 Godiag J2534 / VNCI NANO J2534 Protocols CAN 2.0 CAN/ISO15765 and K-line KWP2000/dual K-line ISO15765, ISO9141, ISO14230, J1850 PWM, J1850 VPW ELM327 mode – ELMConfig, ScanMaster, AlfaOBD, FiatECUScan ECUFlash Yes for Mitsubishi and Subaru – Honda HDS Yes Yes Toyota Techstream Yes Yes JLR SDD Yes Yes Forscan Yes Yes Renault Clip Yes Yes Benz Xentry Passthru Yes Yes BMW ISTA+ Yes Yes Nissan Consult 3+ Yes Yes VAG ODIS Yes Yes GM GDS2 Yes Yes J1979 Tester – Yes Subaru SSM4 Yes Not tested PCMFlash Yes Yes Operating system Windows XP/Win 7/Win10, better 32bit Windows 8/10/11, 32/64bit (driver not recognized if use Win7/WinXP) Firmware Update – Yes, How to update Godiag J2534 firmware? Connection USB USB In sum: Both cables are cheap and better keep both. Godiag J2534 /VNCI J2534 also works in ELM mode. It is compatible with...

Search This Blog