How to Use Godiag ENET Cable with 2024.03 Xentry?

Godiag GT109 ENET cable not only works with BMW ISTA+/E-sys, but also Benz xentry software for DoIP model diagnostic and flashing. The Godiag ENET cable was tested working with 2024.03 xentry.

How to set up/use Godiag ENET cable with latest 2024.03 Xentry?

You will need:

A Godiag GT109 ENET cable ($19.99)

Xentry ENET configurator (requires activation)

Xentry 03/2024

First of all, connect ENET cable with laptop

Use Godiag ENET Cable with 2024.03 Xentry 1

Run Xentry ENET Cars program for Xentry Passthru

NOTE:

Contact www.obdii365.com to download the program and activate it for Godiag ENET cable. It is not free !!!

After activation, run program, select DoIP Only in SelectPTDevice.

The system will bring Xentry Login interface, input user name: xentry and password: 12345 to log in xentry offline.

It is the 2024.03 xentry with Zenzefi license for W223 W206 W213 W167 etc DoIP cars. Contact WHATSAPP:https://wa.me/8618259252285 if need 03/2024 xentry.

If you use other version xentry, you may need to purchase license separately.

Software is ready to use. Select model, i.e C class C206 and diagnose car.

Comments

Godiag GD101 J2534 vs Openport 2.0

Openport 2.0 and godiag GD101 J2534 which is a better J2534 passthru device? Let’s take a look at the comparison table first. Item Openport 2.0 Godiag J2534 / VNCI NANO J2534 Protocols CAN 2.0 CAN/ISO15765 and K-line KWP2000/dual K-line ISO15765, ISO9141, ISO14230, J1850 PWM, J1850 VPW ELM327 mode – ELMConfig, ScanMaster, AlfaOBD, FiatECUScan ECUFlash Yes for Mitsubishi and Subaru – Honda HDS Yes Yes Toyota Techstream Yes Yes JLR SDD Yes Yes Forscan Yes Yes Renault Clip Yes Yes Benz Xentry Passthru Yes Yes BMW ISTA+ Yes Yes Nissan Consult 3+ Yes Yes VAG ODIS Yes Yes GM GDS2 Yes Yes J1979 Tester – Yes Subaru SSM4 Yes Not tested PCMFlash Yes Yes Operating system Windows XP/Win 7/Win10, better 32bit Windows 8/10/11, 32/64bit (driver not recognized if use Win7/WinXP) Firmware Update – Yes, How to update Godiag J2534 firmware? Connection USB USB In sum: Both cables are cheap and better keep both. Godiag J2534 /VNCI J2534 also works in ELM mode. It is compatible with...

How to Modify GODIAG GD101 / VNCI J2534 Nano ?

Here is the DIY modification tutorial for Godiag GD101 or VNCI J2534 HS-CAN + MS-CAN. Simply modification for GODIAG GD101 / VNCI J2534 Nano . Just add a slide switch and remove the two resistors. For me, a simple solution without an adapter. Maybe it will be helpful for someone. Remove R59 and R60 resistors. Add switch 2 position ON 6 pin. Tested with AlfaOBD App

How to Set up Honda HDS 3.105 with Godiag J2534?

Has anyone successfully set up Honda HDS 3.105.034 with a Godiag GD101 J2534 cable on Win10? Sharing our customers’ installation experience. How to Set up Honda HDS 3.105.034 for Godiag GD101? 1. Download and install the driver for the gd101 cable. 2. After installing the driver, be sure to check for updates to the built-in Firmware! The cable had firmware version 1.8 after purchase and the utility updated it to the latest version 1.14. Those who say that this cable is buggy probably did not update its built-in firmware, but used the one that came from the store. 3. Install the HDS. If the car model is before 2017, then use the old HDS. if it is newer, then use i-HDS. These are different HDS versions. Version/year/month/day of release HDS 3.017.012 — 10/15/28 — for Windows 8 and below HDS 3.101.019 — 07/16/22 — for Windows 8 and below HDS 3.102.008 — 02/17/22 — for Windows 10 and above HDS 3.102.029 — 07/17/17 — for Windows 10 and above HDS 3.102.051 — 03/18/1...

Search This Blog