Skip to main content

Godiag J2534 vs Xhorse MVCI Pro

 Xhorse MVCI Pro and Godiag GD101 J2534 passthru device which is better?


Check the table comparison:

ItemXhorse MVCI Pro

xhorse mvci pro

Godiag GD101 J2534

godiag j2534

BrandXhorseGodiag
Toyota techstream softwareYesYes
Honda HDS softwareYesYes
VAG ODIS softwareYesYes
Ford IDS softwareYesYes
Mazda IDS softwareYesYes
Subaru SSM4 softwareYesYes
JLR SDD software Yes
Renault Clip software Yes (Godiag j2534 with Renault Clip)
Nissan Consult iii+/R2R

software

 Yes (godiag j2534 with Nissan Consult+)
Volvo VIDA software Yes
GM GDS2 software Yes
Xentry passthru Yes
PCM-flash Yes
ELM327 Mode (scanmaster, Forscan etc) Yes
Compatible with OEM software for online programmingNoNo
Operating systemWin7/Win8/Win9/Win10Windows 8/10/11, 32/64bit (Better Not Install Driver on Win7!)
DriverXhorse MVCI driverGodiag J2534 driver
UpdateSoftware update by link

Firmware update online

Software update by link

Firmware update online

Price$88$20USD

In sum:

MVCI Pro does better performance on VAG ODIS and Subaru SSM4.

MVCI Pro supports Ford and Mazda IDS software. Godiag does not.

MVCI Pro is powered by license, and supports Ford Mazda Subaru, VAG, Toyota and Honda brands only. Godiag is compatible with JLR SDD, GDS2, Xentry passthru, VIDA, Renault Clip and Nissan software as well.

Godiag j2534 is cheaper than mvci pro. You can get both.

Labels:

Comments

Post a Comment

Popular posts from this blog

Free Download Godiag J2534 Driver 2.3- Update Renault CLIP

 Godiag GD101 J2534 passthru device released new software V2.3.  With the  newest 2.3 driver, the   Godiag GD101  /  VNCI J2534   devices now work in Renault Clip! Godiag driver 2.3 download Software V2.3 Firmware V1.9 Fix bug: failed to test Renault clip software NOTE:  Tested working with Renault Clip V227. Free to test other versions.  J2534 device only works with 2005- CAN BUS Renault models. For -2005 Kline models, better use CAN CLIP interface.  How to use Godiag J2534 with Renault CLIP http://blog.obdii365.com/2023/08/03/how-to-set-up-renault-clip-for-godiag-j2534-interface/
Post a Comment
Read more

How to Modify GODIAG GD101 / VNCI J2534 Nano ?

Here is the DIY modification tutorial for Godiag GD101 or VNCI J2534 HS-CAN + MS-CAN. Simply modification for GODIAG GD101 / VNCI J2534 Nano . Just add a slide switch and remove the two resistors. For me, a simple solution without an adapter. Maybe it will be helpful for someone. Remove R59 and R60 resistors. Add switch 2 position ON 6 pin. Tested with AlfaOBD App
Post a Comment
Read more

How to Use Renault Clip with Godiag J2534?

  Godiag gd101 and vnci j2534 clone have the same function. With the   newest 2.2 driver, the GD101 / VNCI J2534 Nano devices now work in Renault Clip! This is the latest  Godiag GD101  /  VNCI J2534  Nano driver / software Version 2.2 with major fixes and the firmware can be updated to Version 1.8. GODIAG GD101 J2534 is compatible with J2534 Passthru and ELM327. GODIAG GD101 J2534 has a similar functionality as Tactrix Openport 2.0. Support most of all of J2534 compatible software (HDS, TIS, ODIS, JLR SDD, PCMFLash…). Support most of all of ELM327 software (ELMConfig, Forscan, ScanMaster…).   Here is the tip to set up Renault Clip software for Godiag/VNCI J2534.  It can be used on virtual machines, and it is recommended to use Win10.  Before use, you need to change the registry, which can be viewed on OBDII365 blog here . With the newest firmware inside the both the probes,  configure in Windows registry entries regarding the Name and the Vendor to 1B and 79B, respectively , to simula
Post a Comment
Read more