To set up   Godiag V600 BMW ICOM   diagnostic tool with 03/2022   ISTA+ 4.35.20   or later version, you have to configure firmware. If V600 shows Firmware status in State, don’t continue. Follow steps below to set up Godiag v600 with ISTA+ 4.32.5 and up: 1. Connect V600 with vehicle, connect device with either WLAN or WiFi (Don’t connect WLAN and WiFi at the same time), run  AnyVCI.Updater.exe  application Download application here https://mega.nz/file/TFhBWJwT#E2X5Jp4N5XSBCJIhKGOYihpTfkbGPIzz95ZGhPfQxnU Registration is required for the first use.  Then login with user name and password. 2. Run STDiag Updater 2021 Go to  “ Advanced features ” setting 3. Go to FirmwareVersion Select user-defined Set value as following Boot:13000 App:14700 Pck: 32211 Press Set to save setting Then check device information in iTool Radar Godiag BMW V600  scanner now is working fine with ISTA+ 4.35.20.