Godiag GT100 and Autel Test on Nissan Range Rover

Godiag GT100 OBD2 breakout box finally work with Autel scanner, tried to diagnose Range Rover 2002 and Nissan Tiida 2007. Using K-line communication.

Diagnose Nissan Tiida 2007 by Autel scanner and Godiag GT100

Path: Nissan -> System selection -> Diagnosis -> Control unit -> Engine -> Diagnostic system initializing (you can see on GT100, the CAN-L indicator blinks green light) -> Read codes -> Establishing vehicle communication (meanwhile CAN_L indicator light flashes) -> Fault codes read out successfully.

Diagnose Range Rover 2002 by Autel scanner and Godiag GT100

Path: Range Rover -> 2002 -2005 -> system data login -> Yes to confirm the vehicle information -> Diagnosis -> Engine -> Bosch V8 Engine (Petrol) -> Active test -> Establishing vehicle communication -> back to “Read codes”, you can see your Godiag GT100 CAN-L indicator flashes and the fault code read out successfully.

If you have any problem with Godiag GT100 connection with the scanner:

Follow this video test to find out whether there is a problem with the gt100 box. If the test is connected, it means that the gt100 is good.

Watch the following video, to check whether the power cord of the obd line is connected, and determine whether there is a problem with the obd line.

And please follow this video to connect ECU and Godiag GT100 to test, if it can be tested normaly, it should be the OBD line DB25 end welding problem, we can replace an OBD line for you.

www.obdii365.com

http://blog.obdii365.com/2021/04/02/godiag-gt100-work-with-autel-on-range-rover-and-nissan/

Comments

How to Modify GODIAG GD101 / VNCI J2534 Nano ?

Here is the DIY modification tutorial for Godiag GD101 or VNCI J2534 HS-CAN + MS-CAN. Simply modification for GODIAG GD101 / VNCI J2534 Nano . Just add a slide switch and remove the two resistors. For me, a simple solution without an adapter. Maybe it will be helpful for someone. Remove R59 and R60 resistors. Add switch 2 position ON 6 pin. Tested with AlfaOBD App

Free Download Godiag J2534 Driver 2.3- Update Renault CLIP

Godiag GD101 J2534 passthru device released new software V2.3. With the newest 2.3 driver, the Godiag GD101 / VNCI J2534 devices now work in Renault Clip! Godiag driver 2.3 download Software V2.3 Firmware V1.9 Fix bug: failed to test Renault clip software NOTE: Tested working with Renault Clip V227. Free to test other versions. J2534 device only works with 2005- CAN BUS Renault models. For -2005 Kline models, better use CAN CLIP interface. How to use Godiag J2534 with Renault CLIP http://blog.obdii365.com/2023/08/03/how-to-set-up-renault-clip-for-godiag-j2534-interface/

Godiag GD101 J2534 vs Openport 2.0

Openport 2.0 and godiag GD101 J2534 which is a better J2534 passthru device? Let’s take a look at the comparison table first. Item Openport 2.0 Godiag J2534 / VNCI NANO J2534 Protocols CAN 2.0 CAN/ISO15765 and K-line KWP2000/dual K-line ISO15765, ISO9141, ISO14230, J1850 PWM, J1850 VPW ELM327 mode – ELMConfig, ScanMaster, AlfaOBD, FiatECUScan ECUFlash Yes for Mitsubishi and Subaru – Honda HDS Yes Yes Toyota Techstream Yes Yes JLR SDD Yes Yes Forscan Yes Yes Renault Clip Yes Yes Benz Xentry Passthru Yes Yes BMW ISTA+ Yes Yes Nissan Consult 3+ Yes Yes VAG ODIS Yes Yes GM GDS2 Yes Yes J1979 Tester – Yes Subaru SSM4 Yes Not tested PCMFlash Yes Yes Operating system Windows XP/Win 7/Win10, better 32bit Windows 8/10/11, 32/64bit (driver not recognized if use Win7/WinXP) Firmware Update – Yes, How to update Godiag J2534 firmware? Connection USB USB In sum: Both cables are cheap and better keep both. Godiag J2534 /VNCI J2534 also works in ELM mode. It is compatible with...

Search This Blog