MPPS V18 read Audi A6 ME7.5 ECU via GODIAG GT100

By connecting to the Godiag GT100 OBD2 ECU breakout box, MPPS V18 will be able to individually connect to a single Audi A6 ME7.5 ECU to read data, and Godiag GT100 indicator will flash the corresponding protocol light to tell if MPPS V18 is communicating with the ECU good or not.

Tools to use:

Godiag GT100 OBD2 breakout box

MPPS V18

Audi A6 ME7.5 ECU box

Oscilloscope

A computer running win7 64 bit

- Audi A6 ME7.5 ECU.

- The Oscilloscope is connected and it is how it like when reading data.

- After connecting to the ME7.5 ECU, how Godiag GT100 indicators change, K-line indicator is flashing.

- Connected to MPPS V18.

-Is reading flashing.

- Use the banana plug to connect the cable and then the Oscilloscope. The cable is optional to connect any device according to your need.

Finally, complete reading data, the oscilloscope data high and low disappear.

Next is to read ME7.5 ECU data with MPPS V18 and Godiag GT100:

www.godiag.co.uk

Comments

How to Modify GODIAG GD101 / VNCI J2534 Nano ?

Here is the DIY modification tutorial for Godiag GD101 or VNCI J2534 HS-CAN + MS-CAN. Simply modification for GODIAG GD101 / VNCI J2534 Nano . Just add a slide switch and remove the two resistors. For me, a simple solution without an adapter. Maybe it will be helpful for someone. Remove R59 and R60 resistors. Add switch 2 position ON 6 pin. Tested with AlfaOBD App

Free Download Godiag J2534 Driver 2.3- Update Renault CLIP

Godiag GD101 J2534 passthru device released new software V2.3. With the newest 2.3 driver, the Godiag GD101 / VNCI J2534 devices now work in Renault Clip! Godiag driver 2.3 download Software V2.3 Firmware V1.9 Fix bug: failed to test Renault clip software NOTE: Tested working with Renault Clip V227. Free to test other versions. J2534 device only works with 2005- CAN BUS Renault models. For -2005 Kline models, better use CAN CLIP interface. How to use Godiag J2534 with Renault CLIP http://blog.obdii365.com/2023/08/03/how-to-set-up-renault-clip-for-godiag-j2534-interface/

Godiag GD101 J2534 vs Openport 2.0

Openport 2.0 and godiag GD101 J2534 which is a better J2534 passthru device? Let’s take a look at the comparison table first. Item Openport 2.0 Godiag J2534 / VNCI NANO J2534 Protocols CAN 2.0 CAN/ISO15765 and K-line KWP2000/dual K-line ISO15765, ISO9141, ISO14230, J1850 PWM, J1850 VPW ELM327 mode – ELMConfig, ScanMaster, AlfaOBD, FiatECUScan ECUFlash Yes for Mitsubishi and Subaru – Honda HDS Yes Yes Toyota Techstream Yes Yes JLR SDD Yes Yes Forscan Yes Yes Renault Clip Yes Yes Benz Xentry Passthru Yes Yes BMW ISTA+ Yes Yes Nissan Consult 3+ Yes Yes VAG ODIS Yes Yes GM GDS2 Yes Yes J1979 Tester – Yes Subaru SSM4 Yes Not tested PCMFlash Yes Yes Operating system Windows XP/Win 7/Win10, better 32bit Windows 8/10/11, 32/64bit (driver not recognized if use Win7/WinXP) Firmware Update – Yes, How to update Godiag J2534 firmware? Connection USB USB In sum: Both cables are cheap and better keep both. Godiag J2534 /VNCI J2534 also works in ELM mode. It is compatible with...

Search This Blog